engine swap nissan to toyota

[tev]

Which toyota engine could fit in a nissan b11 station wagon with little modification?

[Bingwa_Scrotum]

Why mod?

[Karoga]

Too expensive

[ChifuMbitika]

Jaribu Toyora 100. But the modification part will eat you a lot of money coz you will have to change even the gearbox, manifold, alternator, distributor etc.

[mozilla]

@ChifuMbitika

Jaribu Toyora 100. But the modification part will eat you a lot of money coz you will have to change even the gearbox, manifold, alternator, distributor etc.

do you have to change the instrument cluster?

[Teddy_time]

Bro, you will spend too much money on it. Afadhali you sell the car as scrap, top up some money, then buy ata B15. You will spend much less cash that way and you wont need to worry about reliability issues. When you swap engines, sometimes unapata shida be it electrical or mechanical. Especially when you swap from different car makes.

[ChifuMbitika]

@Teddy_time

Bro, you will spend too much money on it. Afadhali you sell the car as scrap, top up some money, then buy ata B15. You will spend much less cash that way and you wont need to worry about reliability issues. When you swap engines, sometimes unapata shida be it electrical or mechanical. Especially when you swap from different car makes.

With a good experienced mechanic, it’s easy to change a car engine but the cost involved in replacing the few other components is costly

[Teddy_time]

@ChifuMbitika

With a good experienced mechanic, it’s easy to change a car engine but the cost involved in replacing the few other components is costly

This is the problem. You wont even be able to mount the engine without fabrication custom mountings. And thats just to get the engine in the engine bay.

You may also need to fabricate other engine parts whose reliability may be questionable. Vitu kama aircon pia. You will need custom pipes. Then, Iam sure the aircon compressor wont simply work with the aircon interface in the dashboard where you select the aircon temperature.

Unless the guy has money and he is doing it as a hobbyist project, its best to just sell the car as scrap and buy another car.

[ChifuMbitika]

@Teddy_time

This is the problem. You wont even be able to mount the engine without fabrication custom mountings. And thats just to get the engine in the engine bay.

You may also need to fabricate other engine parts whose reliability may be questionable. Vitu kama aircon pia. You will need custom pipes. Then, Iam sure the aircon compressor wont simply work with the aircon interface in the dashboard where you select the aircon temperature.

Unless the guy has money and he is doing it as a hobbyist project, its best to just sell the car as scrap and buy another car.

Quite true

[tev]

@ChifuMbitika

Quite true

Then a nissan b15 engine or b14 would fit right?

@Teddy_time

This is the problem. You wont even be able to mount the engine without fabrication custom mountings. And thats just to get the engine in the engine bay.

You may also need to fabricate other engine parts whose reliability may be questionable. Vitu kama aircon pia. You will need custom pipes. Then, Iam sure the aircon compressor wont simply work with the aircon interface in the dashboard where you select the aircon temperature.

Unless the guy has money and he is doing it as a hobbyist project, its best to just sell the car as scrap and buy another car.

QUOTE=“Teddy_time, post: 2689466, member: 40055”]This is the problem. You wont even be able to mount the engine without fabrication custom mountings. And thats just to get the engine in the engine bay.

You may also need to fabricate other engine parts whose reliability may be questionable. Vitu kama aircon pia. You will need custom pipes. Then, Iam sure the aircon compressor wont simply work with the aircon interface in the dashboard where you select the aircon temperature.

Unless the guy has money and he is doing it as a hobbyist project, its best to just sell the car as scrap and buy another car.
[/QUOTE]

[martin]

First, find a mechanic conversant with engine swapping. He should be able to advise you on the best engine to get on inspecting the engine bay of the Nissan. I bet a 4A,4E,5A or 5E will fit with a little modification.

[The_real_voice]

Wekelea ya probox uone hutashikika.

[mututho_wa_kk]

@tev

Which toyota engine could fit in a nissan b11 station wagon with little modification?

Ukiwa na 50k umebuy Engine mpya ya Nissan +umemlipa mechanic… But kama ni pesa zinasubua wewe unaweza fanya hizo modifications zako plus ni lazima mkosane na mechanics…

[WongNamba]

@Teddy_time

This is the problem. You wont even be able to mount the engine without fabrication custom mountings. And thats just to get the engine in the engine bay.

You may also need to fabricate other engine parts whose reliability may be questionable. Vitu kama aircon pia. You will need custom pipes. Then, Iam sure the aircon compressor wont simply work with the aircon interface in the dashboard where you select the aircon temperature.

Unless the guy has money and he is doing it as a hobbyist project, its best to just sell the car as scrap and buy another car.

Bitter gospel truth hapo

[tev]

@mututho wa kk

Ukiwa na 50k umebuy Engine mpya ya Nissan +umemlipa mechanic… But kama ni pesa zinasubua wewe unaweza fanya hizo modifications zako plus ni lazima mkosane na mechanics…

Engine gani hio ya nissan ?